EPSILON® Regenerative Thermal Oxidizer (RTO)

服务

The EPSILON® regenerative thermal oxidizer (RTO) in a modular concept for two (2), three (3), four (4) or five (5)-can oxidizers offers the highest flexibility for any application.

Different process ceramics, heat exchange media, configurations for optimized thermal efficiencies and press drop
Simplest poppet valve design for highest requirement of destruction, efficiencies of more than 99.8%
Hot-side bypass system for high solvent loads
Prepared for secondary heat recovery for water, thermal oil, steam or air
Bake-out mode for cleaning of ceramic bed in case of organic deposits, as well as integrated solutions without smoke emissions
Volume flow capacity of 5,000 to 160,000 Nm3/hr, and higher

EPSILON
Multiple can RTO	2,3,4,5 or more cans according to customer needs
Innovative Dampers	MEGTEC's own Poppet Valve Design, with 15 years field experience
Flow Capacity	5,000 - 200,000 Nm3/hr
Thermal efficiency	92 to 98%
Autotherm Operation	1-2 g/Nm3
Emission Limit	<20 mg C/Nm3 or lower
Turndown Ratios	1:5 to 1:10 dependent on the number of cans
VOC Concentration	Up to 25% LEL by using the optional hot-side bypass
Secondary Energy Recovery	According to customers needs, i.e. air, water, oil, steam, electricity
Installation at site	Minimized by pre-assembled & prewired equipment parts
Relocation of units	Designed for ease of disassembling, in most cases, no media removal is necessary